$ cat /sys/devices/platform/camerasensor0/info If done correctly you should see something like: (You will not be able to log in on that screen unless you have a USB keyboard attached to the ARTIK board.) To test whether the camera sensor driver has been probed successfully, read the ‘sysfs’ entry of the camera sensor. After power on and boot up the system, verify that you get a console login screen.The connectors snap together precisely, so align them carefully before applying pressure. With power disconnected and both boards placed upside down, attach the flat cable end marked 'PLATFORM Board' to the MIPI Camera connector(con708) of the ARTIK 530/710 board and the other end to the MIPI camera. MIPI camera module for ARTIK 530 or 710 board : SIP-ASRNXS001 Here, a case connecting MIPI or USB camera is described. USB camera Need to Support USB video class (recommended : Logitech c525 usb HD webcam).USB hd webcam or, MIPI camera(samsung Artik 5MP Camera Kit) This document will touch upon mainly multimedia relevant developer test guide such as camera, video playback, audio, …, etc.Įach section in this guide will explain one of the multimedia functionality, with a software centric approach.įor convenience, if described as following ĪRTIK board or ARTIK module means both Artik710 and Artik530 development board.Ĭamera means both MIPI Camera and USB camera.

This guide will provide you with an in-depth introduction to Samsung ARTIKTM 710 and ARTIKTM 530 Development Board.

7.3 Camera Recording Using camera_test applications.

7.2 Camera Recording with Display Preview.

6.3 Camera Capture using camera_test applications.

6.2 Camera Preview using camera_test applications.

5.6 change streaming video bitrate using player_test application.

5.5 playback streaming video using player_test application.

5.4 seek test during playing video on player_test applications.

5.3 playback video file using player_test applications.

5.2 playback video file using gstreamer.

4.1 Check the basic gstreamer operation.

Logitech c525 set file location